Psion Teklogix Service Kit - PDM (Plus) : 7535 G2
/
Número de parte: Service Kit - PDM (Plus)
Includes:? PDM, Universal AC adapter, 1 USB Cable, Null Modem Serial Cable.
# | No. de Parte | Descripción | Cotizar |
---|---|---|---|
1 | PSION-7535G2-B | PROCESADOR Y MEMORIA Procesador PXA 270 XScale a 520 MHz 128 MB de SDRAM, 64 MB de FLASH ROM emperatura de funcionamiento: -10?C a +50?C Temperatura de almacenamiento: -25?C a 60?C Humedad: relativa de 5% a 95%, sin condensaci?n Lluvia/polvo: IEC 529, clasificaci?n IP65 emperatura de funcionamiento: -10?C a +50?C Temperatura de almacenamiento: -25?C a 60?C Humedad: relativa de 5% a 95%, sin condensaci?n Lluvia/polvo: IEC 529, clasificaci?n IP65 |
# | No. de Parte | Descripción | Cotizar |
---|---|---|---|
1 | 1900 mAh Li-Ion Battery for 75 | The 1900 mAh lithium ion battery will provide 8 hours of usage at 5 scans/TX/RX per min. | |
2 | Tethered Scanner Cables | JB5 connector to LS3X00. | |
3 | Wrist Strap for 7530 G2 and 75 | The Wrist Strap secures the handheld computer to the user\'s wrist to prevent accidental dropping of the device. | |
4 | Shoulder Strap for 7530 G2 and | The Shoulder Strap allows the secure carrying of the 7535 G2 and 7530 G2?handheld computers. | |
5 | Protective Carry Case for 7535 | This snug-fitting rubber carry case is designed to provide extra protection in extremely harsh environments where frequent dropping of the device may be a common occurrence. | |
6 | Pistol Grip Kit for 7535 G2 | The Pistol Grip Kit comes complete with center balanced pistol grip, mounting screws and installation instructions to allow the handheld computer to be used in scanning or imaging applications using the built-in trigger mechanism in the pistol grip handle. | |
7 | Nylon Carrying Case for 7535 G | Nylon Carrying Case for the 7535 G2. | |
8 | 7535 G2 Holster (Form Fit) | The holster provides a protective carrying case for all configurations of the handheld computer. It also has separate compartments designed to hold an extra battery and replacement stylus. The holster comes with a leg strap and a terminal strap that is looped through the pistol grip handle to tether the terminal to the holster. With the optional Velcro Belt (PN 18785-001), the holster provides maximum flexibility and comfort. | |
9 | 7535 G2 Handstrap Kit | The Handstrap Kit includes the elastic strap, mounting screws and installation instructions to provide an excellent carrying option allowing the handheld computer to fit securely in the palm of your hand while the strap is held across the back of the hand. | |
10 | Nylon Web Belt, 1.5 | This flexible nylon web belt is 1.5 X 57 and has a heavy duty plastic buckle. It may be used to hold many handheld terminal accessories, such as belt loops, velcro pads, swivel belts, and holsters. | |
11 | Nylon Web Belt, 1.5 | This flexible nylon web belt is 1.5 x 48 and has a plastic buckle. It may be used to hold many handheld terminal accessories, such as belt loops, velcro pads, swivel belts, and holsters. | |
12 | Touchscreen Protective Cover ( | Designed to protect the touch screen - particularly for high touch applications. | |
13 | Protective Carry Case - Yellow | This snug-fitting yellow rubber carry case is designed to provide extra protection and high visibility in extremely harsh environments where frequent dropping of the device may be a common occurrence. | |
14 | Handstrap with Belt Clip | Attaches to the back of the 7535 G2 / 7530 G2 to provide a solid grip of the unit. The belt clip is a larger version of those often offered with cell phones. Even with the strap in place, it is easy to access the battery. | |
15 | Velcro Belt | The 52 Velcro Belt is compatible with?7535 G2?and 7530 G2?belt loops, swivel belts, velcro pads, and holsters, and allows the user to quickly remove or put on the entire apparatus. | |
16 | Belt Loop | The belt loop is used to attach the device to the user's belt or optional Velcro Belt (PN: 18785-001) while securing the handheld computer by looping the cord through the mounting holes in the base of the terminal. It allows the terminal to dangle at the side, ready for use while still attached, securely to the user. | |
17 | Quad Unit Charger and Docking | Charges 4 docked 7535 G2 / 7530 G2's while simultaneously providing communications via the Ethernet Port located on the back of the unit. | |
18 | Dual Unit Charger and Docking | Charges the docked 7535 G2 / 7530 G2?while simultaneously charging a spare battery located in a receptacle on the side of the unit. This version of the Charger/Dock also provides communications via the Ethernet Port located on the back of the unit. | |
19 | Dual Unit Charger | Charges the docked 7535 G2 / 7530 G2?while simultaneously charging a spare battery located in a receptacle on the side of the unit. | |
20 | 6 Unit Gang Charger | 6 Unit Gang Charger with power and battery status indicatiors will charge batteries in under 2 hours. | |
21 | Service Kit - PDM (Plus) | Includes:? PDM, Universal AC adapter, 1 USB Cable, Null Modem Serial Cable. | |
22 | PDM (Portable Docking Module) | Attaches to the bottom of the 7535 G2 / 7530 G2?and features power, USB and serial port connectivity. | |
23 | 1020006 | Package of 5 replacement stylus - Yellow. | |
24 | Non Powered Fork Lift Cradle f | Non Powered Fork Lift Cradle with port replicator with single hand release capability. Various mounting accessories and upgrade kits available as optional extras. | |
25 | Vehicle-Mount Scanner Holder ( | The vehicle mount scanner holder secures the scanner on the truck, reducing vibration, and goes a long way to help eliminate the possibility of the scanner falling off the truck. The rubber coating also protects the scanner from scratches. This 7862 model holder is standard length. A long length model (7982A) is also available | |
26 | Powered Fork Lift Cradle with | Powered Fork Lift Cradle with port replicator with single hand release capability. Various mounting accessories and upgrade kits available as optional extras. | |
27 | Powered Fork Lift Cradle 10 - | Powered Fork Lift Cradle 10 - 90VDC with single hand release capability.? Various mounting accessories and upgrade kits available as optional extras. | |
28 | Non Powered Fork Lift Cradle | Fort Lift Cradle with single hand release capability. Various mounting accessories and upgrade kits available as optional extras | |
29 | Cradle Vertical Mounting Plate | This mount plate may be used instead of P/N 18447 and 18449. The Vertical mount plate accepts the P/N 92892 holder. | |
30 | Cigarette Lighter Adapter for | Connects to the HU1005 Portable Docking Module. This will allow the 7535 to be charged from a standard 12VDC car cigarette receptacle. | |
31 | Wall Adapter | Universal Power Supply AC Adapter 15VDC 2.5A. For use with the HU1005 PDM. | |
32 | RFID Reader with 920.5 - 924.5 | Available for China only. | |
33 | RFID Reader with 865-868 MHz R | Available in Europe Only | |
34 | RFID Reader with 952-956 MHz R | Available in Japan Only | |
35 | RFID Reader, UHF Integrated, 9 | For 7535 G2 / 7530 G2 equipped w Pistol Grip and Tether Port. |